Features
- Compliant with IEEE 802.11n wireless technology capable of up to 450Mbps data rate
- Backward compatible with 802.11 a/b/g standard for seamless integration
- Multiple Wireless Modes: AP, Client CPE, WDS P-T-P, WDS P-T-MP, Repeater
- 3×3 MIMO technology increases data rate
- Wireless QoS(IEEE 802.11e, WMM) for video packets precedence transmission
- Enhanced wireless security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP/AES) and 802.1X Authentication
- Supports 2-port RS-232/422/485-to-Ethernet Device Server
- Up to 16 simultaneous connections allows multiple hosts collection
- Built-in 2-port MODBUS ASCII/RTU to MODBUS TCP Gateway
- Up to 32 TCP masters or 32 TCP slaves per port at the same time
- Built-in 20MB buffer memory to avoids data loss once the connection is down
- SNTP (simple network time protocol) for network clock synchronization
- Broadcast/Multicast/Unknown Unicast storm control improves throughput problems
- USB console interface for easy connection with laptops
- Supports MODBUS TCP protocol for facilitating the remote management by SCADA or with other industrial devices
- CPU utilization displays the amount of works the CPU handles
- Auto warning by email, DI, Relay, Syslog & SNMP trap
Specifications
Technology
Standard Compliance
- IEEE 802.11 a/b/g/n Wireless LAN
- IEEE 802.11i Wireless Security
- IEEE 802.11e QoS(WMM)
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-T(X)
- IEEE 802.3ab 1000Base-T
- IEEE 802.3x Flow Control
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1w Rapid Spanning Tree Protocol
- IEEE 802.1Q VLAN Tagging
- IEEE 802.1X Port Authentication
Processing Type: CSMA/CA
Interface
Wireless
- IEEE 802.11 a/b/g/n: 3T3R
Antennas: 3 2dBi omni-directional, RP-SMA(male) connector
Gigabit Ethernet
- RJ45 Ports: 2 10/100/1000Base-T, auto MDI/MDI-X, auto negotiation
Serial Communication
- Serial Ports : 2 RS-232/422/485, Terminal Block(8 contacts per port), 2KV isolation protection
- Baud Rate: 110bps to 921.6kbps
- Data Bits: 7, 8
- Parity: None, Even, Odd, Space, Mark
- Stop Bits: 1, 2
- Flow Control: RTS/CTS ( RS-232 only ), DTR/DSR, XON/XOFF
- RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422: Tx+, Tx-, Rx+, Rx-, GND
- RS-485( 2-wire ) : D+, D-, GND
- RS-485( 4-wire ) : Tx+, Tx-, Rx+, Rx-, GND
Console Port : USB B-Type connector
Digital Input(DI)
- 1 set
- 0~+5V is OFF
- +11V~30V is ON
- Max. input current 6mA
Alarm Contact(DO)
- 1 relay output
- Carry current 2A@24VDC
Terminal Resistor Switches: 2 sets, 120KΩ
Reset Button