MIP-6

The MIP-6 monitors deterioration in motor insulation level for both low and medium voltage motors. It measures the motor's insulation resistance to ground and displays the actual and average highs and lows along a predefined period of time. The measured range is 0.1 to 20 Mega Ohms and is available in low and medium voltage versions. Four programmable changeover relays provide digital output signals and an RS485 communications port provides real time information.

Advantages at a Glance

• Monitors insulation deterioration for low & medium voltage motors
• Displays the present and average insulation resistance on LCD
• Monitoring while motors are de-energized
• Automatic operation under default parameters
• Programmable parameters
• Microprocessor based technology
• Alarm / Trip Setpoint in the range of 0.1 to 20 Mega Ohms
• Utilizes up to 48Vdc test voltage to increase personnel safety
• Illuminated LCD display with 2 lines of 16 characters each
• Six keys for easy programming
• Three LEDs for easy status indication
• Deterioration monitoring by storing history with time stamp
• Unauthorized parameter modification prevention
• Four C/O 8 Amps, 250V programmable signaling relays
• Optional analogue 0/4~20mA output for remote reading
• Optional Modbus communications
• Control voltage: 120V +/- 20%, 50/60Hz
• Operating Temperature Range 0ºC to +50ºC (default - all units)
  -10ºC t0 +60ºC (optional)

Two types of Unit;

• Low Voltage Unit
• Medium voltage unit with an additional resistor box
  (up to 7.2kV medium voltage motors)